| |
|||||||
| |
|
|
|
|
|
|
|
 |
||
 |
 |
 |
| COSMO |
 |
| Reed Sensor-P Type | Reed Sensor-MK Type | Mouse Sensor | Photo Interrupter |
|
| Reed Sensor-P Type |
Type No. |
contact FORM |
Contact Resistance (mohm- Max) |
Insulation Resistance
(ohm min) |
Power Consu- mption (VA max) |
Maximum Swit- ching Voltage |
Maximum Swit- ching Current |
Mini- mum Break- down Voltage |
Nominal Voltage |
Coil Resistance e+/-10% |
Must Operate (VDC) |
Must Release (VDC) |
Circuit |
Prices |
|
1A SPST-NO |
150 |
1G |
1 |
30 VDC |
0.1A |
- |
10-15AT |
15AT |
- |
5AT |
|
 |
||
1A SPST-NO |
150 |
1G |
1 |
30 VDC |
0.1A |
- |
10-15AT |
- |
- |
- |
|
|
||
1A SPST-NO |
150 |
1G |
1 |
30 VDC |
0.1A |
- |
10-15AT |
- |
- |
- |
|
|
||
1A SPST-NO |
200 |
1G |
10 |
200 VDC |
0.5A |
- |
- |
- |
- |
- |
|
|
|
|
| Reed Sensor-MK Type |
Type No. |
contact FORM |
Contact Resistance (mohm Max) |
Insulation Resis- tance (ohm min) |
Power Consu- mption (VA max) |
Maximum Swit- ching Voltage |
Maximum Swit- ching Current |
Minimum Break- down Voltage |
Nominal Voltage |
Coil Resistance e+/-10% |
Must Operate (VDC) |
Must Release (VDC) |
Circuit |
Pricre |
|
1A
SPST-NO |
15 |
1G |
1 |
30 VDC |
0.1A |
- |
- |
- |
- |
- |
|
|
 |
|
|
| Mouse Sensor |
 |
The circuit consists of 4 photo detectors, 2 current comparators and 2 latches. The 4 photo detectors are spaced in fixed distance such that they can be controlled to a light period or dark period. The photo detectors transfer light into current, then the current comparators generate the results to the latches. If the comparator output is ¡§larger than¡¨, the latch output is in set state. Otherwise the latch output is in reset state. |
| PT |
Model Number |
Forward voltage
Typ. (Vf) |
Reverse voltage
Min. (Vr) |
Radiated output
power Min. Pu (mw) |
Spectrum width of
half value Dl (mw) |
Wave length lp(mw) |
1.25 |
5 |
0.4 |
50 |
940 |
|
1.25 |
5 |
0.4 |
50 |
940 |
|
|
|
|
| IR |
Model Numbers |
Supply voltage Min. (Vcc)
|
Supply voltage Typ. (Icc) |
Output current (Ioh,Iol) |
Operating temperature (Topr) |
Storage temperature (Tstr) |
2 |
0.1uA |
-450uA,2.5mA |
-20 ~ +75¢XC |
-20 ~ +80¢XC |
|
3 |
0.2uA |
-450uA,2.5mA |
-20 ~ +75¢XC |
-20 ~ +80¢XC |
|
| Internal connection Function PIN1 Gnd PIN2 Vcc PIN3 Out-A PIN4 OUT-B |
|
|
|
|
|
| Photo Interrupter |
 |
The KW Series photointerrupter consists
of a high radiant power GaAs infrared LED and a Si phototransistor. Housed
in a short lead package, this device is ideal for automatic mounting. |
| Model Number | Detecting and emitting gap (mm) | Slit width or resolution | Current trandfer ratio IF (mA) | Current trandfer ratio VCE (V) | Current trandfer ratio CTR (%) min. | Response time IC (mA) | Response time RL (ohm) | Response time VCE (V) | Response time Tr (us) typ. | INternal connection diagram | |
| KW1S10FC | 3 | 0.5 | 20 | 5 | 2.5 | 0.5 | 100 | 2 | 3 |
|
|
| KW1S20FC | 3 | 0.5 | 20 | 5 | 2.5 | 0.5 | 100 | 2 | 3 |
|
|
| KW1S40FC | 3 | 0.5 | 20 | 5 | 2.5 | 0.5 | 100 | 2 | 3 |
|
|
| KW1S50FC | 4.2 | 0.5 | 20 | 5 | 2.5 | 0.5 | 100 | 2 | 3 |
|
|
| KW1S53FC | 2 | 0.15 | 20 | 5 | 2 | 0.4 | 1000 | 2 | 38 |
|
|
| KW1S54FC | 3 | 0.5 | 20 | 5 | 2.5 | 0.5 | 100 | 2 | 3 |
|
|
| KW1S55FC | 3 | 0.5 | 20 | 5 | 2 | 0.4 | 100 | 2 | 3 |
|
|
| KW1S56FC | 5 | 0.5 | 20 | 5 | 2.5 | 0.5 | 100 | 2 | 3 |
|
|
| KW1S57FC | 5 | 0.5 | 20 | 5 | 2.5 | 0.5 | 100 | 2 | 3 |
|
|
